Optic Mounts

Products >> Optic Mounts

Optic mounts are used for holding optical components such as mirrors, lenses, prisms, filters etc.. in an experimental setup. Optic mounts can be simple rigid mounts or can be with multi-axes positioning capabilities.

Kinematic Mounts

Miniature Mount

This small square mirror mount is suitable for optics from 6mm to 20mm.

► 3mm Dia tilt screws
► Allen key sockets on tilting screws
► M2 tapped holes at bottom

Plane Mirror Mount

Front surface of the mount is plane. Optics can be fixed to the front surface of the mount by adhesive.

► Tilting range: +/- 2 degrees
► 20 arc sec. sensitivity
► Aluminium alloy

Mount for Rectangular Optics

This mount can be used to position square and rectangular optics.

► Optics held by Aluminium pad
► Tilting range: +/- 3 degrees
► 20 arc sec. sensitivity

Mount for Circular Optics - KMC

Optics can be held in front surface of the mount in a stepped bore by nylon tipped grub screw.

► Tilting range: +/- 3 degrees
► 20 arc sec. sensitivity
► Aluminium alloy

Mount for Circular Optics - BM

Optics can be held in front surface of the mount in a stepped bore by nylon tipped grub screw.

► Black anodized finish
► Post mountable
► Driven by 80 TPI lead screw or micrometer

Maximum Aperture Mount

Optics held in front surface of the mount in a stepped bore by nylon tipped grub screw.

► +/- 2 degree tilt range
► Optics held by nylon tipped set screw
► Optics rest on Teflon pad

Top Adjustable Mirror Mount

Top adjustable mirror mount helps tilting the optic without obstructing the beam

► Dual Spring system
► Aluminium material
► Black anodized finish

Top Adjustable Circular Optics Mount

Top adjustable circular optics mount can hold up to 100mm optics.

► Optics held by nylon tipped set screw
► +/- 2 degree tilt range
► Optics rest on Teflon pad

Top Adjustable Rectangular Optics Mount

Top adjustable rectangular optics mount can hold up to 100mm optics.

► Optics held by nylon tipped set screw
► +/- 2 degree tilt range
► M6 Tap for post mounting

Suitable for standard kinematic optic mounts

► Aluminium alloy
► Black anodized finish
► Optics held by threaded ring

Gimbal Mirror Mounts

Gimbal Mirror Mounts - GMM Series

It provides 360 degree coarse positioning in two axes about the mirror surface

► 360 degree polar & azimuth rotation
► 6 degree fine movement
► 20 arc sec. sensitivity

Cube / Prism mounts

Prism or cube can be placed on top of the plane surface of this mount with the help of adhesive.

► +/- 2 degree adjustable
► 20 arc sec. sensitivity
► Various selection of drives

Single Post Clamping

Optics held in position by nylon tipped clamp that slides on a 6mm post fixed at one corner

► Various selection of drives
► Post mountable
► Aluminium alloy

Dual Post Clamping

Optics held in position by nylon tipped clamp that slides on a 6mm post fixed to the corners

► +/- 2 degree adjustable
► 20 arc sec. sensitivity
► Various selection of drives

Cube / Prism mounts

PMNP-R series prism /cube mounts have three degrees of freedom, two tilt and one rotation.

► +/- 2 degree adjustable
► 360 degree azimuth rotation
► 6 degree fine rotation

Beam Steering Device

Beam Steering Device - BSD Series

Beam steering devices makes use of vibration damped steel posts for supporting mirror assemblies.

► 75mm minimum beam height
► 400mm max beam height
► 360 degree independent rotation

Lens Mounts

Rigid Lens Mount

Lens is held in position by threaded rings inside a threaded bore of the device.

► Post mountable
► Aluminium alloy
► 0.5” to 3” optics mounts are available

Adjustable Lens Mount

Lens is held between nylon tips having angular grooves. These nylon tips provide protection to optics.

► 3 point design
► Post mountable
► Aluminium alloy

Self Centering Lens Mount

These are suitable for experiments where frequent replacement of lens is required.

► Self aligned jaws
► M6 Mounting Hole
► Post Mountable

Focus Adjustable Lens Mount

This focus adjustable lens mount is used to adjust the focus of the lens by backward...

► Fine travel range: 10mm
► Optics held by threaded rings
► Up to 2” optics can be mounted

YZ lens mount consist of a linear adjustable mount on YZ axis.

► YZ travel range: 4mm
► Optics held by threaded rings
► Up to 2” optics can be mounted

XYZ Adjustable Lens Mount

XYZ adjustable lens mount consist of precision XYZ stage with provision for mounting optics.

► YZ Travel range: 10 mm
► X Travel: 50mm
► Drive: lead screw

XYZ Lens Mount

XYZ Lens Mount consists of focus adjustable mount in X axis and translation movement in Y & Z axes.

► YZ travel range: 4mm
► X travel: 10mm
► Optics held by threaded rings

Cylindrical Lens Mount

CLM Series lens mount is suitable for rectangular or square cylindrical lenses.

► Post Mountable
► M6 Mounting holes
► Optics held on rubber pad

Filter Holders

Square Filter Holder

These mounts are suitable for holding filters of square or rectangular shapes.

► Quick removal of filters
► Optics held by leaf springs
► Up to 6 filter mount are stackable

Rectangular Filter Holder

Suitable for rectangular / square filters.

► Optics held by nylon tipped set screw
► Up to 6 filter mounts are stackable
► M6 mounting holes

Circular Filter Cell

Suitable for circular filters

► Optics held by threaded rings
► Aluminium alloy
► Black anodized finish

Filter Cell Holder

Up to 5 filter cells can be stacked

► The cells held by threaded rings
► M6 mounting hole
► Post mountable

Quick Change Filter Holder

Quick inserting or removal of filters

► M6 mounting hole
► Post mountable
► Aluminium alloy

Stackable Filter Cells

These have male and female threads at both ends so that these filter cells can be stacked together.

► Filter held by threaded rings
► Compatible to RLM series mounts
► No limit for the number of filters that can be stacked

FW series can hold up to 12 filters of 1 inch diameter at a time. Filters are held by threaded ring.

► Up to 12 filters can be held
► 3 Pointed spring loaded balls
► Filters held by threaded rings

These have male and female threads on both ends so that these filter cells can be stacked together.

► Aluminium alloy
► Black anodized finish
► M6 & M4 mounting holes

Polariser Mount

Polarizer Rotator - PMC Series

PMC Series can be rotated and locked at desired position.

► 360 degree rotatable
► 1 degree resolution
► Up to two polarizer can be rotated

Precision Polarizer Mount

Plate/sheet polarisers are held between two threaded rings inside a threaded bore.

► Driven by micrometer / leasdscrew
► 0.1 degree resolution
► Coarse to fine changing knob

Microscope Objective Mount

Rigid Objective Mounts

These device can hold standard microscope objectives.

Kinematic Objective Mounts

Kinematic microscope objective mounts provide fine tilt adjustment in two planes

► +/- 2 degree adjustable
► 20 arc sec. sensitivity
► Post mountable

XY Objective Mounts

These microscope objective mounts help the microscope objective to keep its optical axis

► 3mm travel in X & Y direction
► 20 arc sec. sensitivity
► Plane bearing system

XYZ Objective Mounts

XYZMOH Series microscope objective mounts have 10mm travel in X direction.

► 10mm travel in X direction
► 4mm travel in Y & Z direction
► 20 arc sec. sensitivity

5 Axis Objective Mounts

5AMOH Series microscope objective mounts have precision movements in five directions.

► A+/-2 degree Tilting
► 20 arc sec. sensitivity
► Plane bearing system

Iris and Apertures

Standard Precision Pinholes

► Stainless Steel (non magnetic)
► 9.35mm Outer diameter
► 12 μm thickness

High Power Precision Round Apertures

► Material: Copper
► 9.35mm Outer diameter
► 25 μm Thickness

Standard 9.35mm diameter pinholes are fixed inside the mount by threaded rings.

► 3mm fine adjustment range in both axis
► Driven by 80 TPI lead screw
► Suitable for for 9.35mm diameter pinholes

Round Apertures

► 25mm outer diameter
► 0.5 mm thickness
► Compatible with RLM-25 mount

STD Variable Round Aperture

SSID Series variable round aperture is used generally for Laboratory applications.

► Made of Brass and Aluminium
► Lever made of steel
► Compatible MSSID Series

STD Variable Round Aperture Mount

MSSID series variable aperture mounts are suitable for SSID series aperture.

► M6 Mounting hole
► Black anodized finish
► Compatible SSID Series apertures

Precision Lead screw driven slits are available for a max opening of 2mm.

► Opens equally from center
► Polished steel blades
► M6 mounting hole

Spatial Filter

Fine XY adjustment facility provided for both objective and pinhole.

► 10mm linear movement
► 3mm XY adjustment
► M6 mounting hole

connect with us ..

Home l Products l Supports l News & Events l About Us l Contact Us

Privacy Policy l Terms & Conditions

© 2010 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.