Optical Fiber Characterization Apparatus (Breadboard based)

Products >> Educational Equipments >> Optical Fiber Characterization Apparatus (Breadboard based)

Model No: HO-ED-F-03

In the model HO-ED-F03, Components are mounted on optical breadboard (800 x 600mm) for performing experiments. The use of optical breadboards makes the system flexible and helps to setup many other experiments and projects if needed.

All other features are same as that of rail based model HO-ED-F02 except that components are made breadboard mountable. In this model various components can be arranged on the breadboard with desired distances and configurations. There are M6 tap holes on 25mm grid throughout the breadboard to facilitate the mounting.

► Determination of fibre attenuation by cut-back method

► Bending loss determination

► To determine the numerical aperture of optical fiber

► Splice loss determination

Loss at the fiber splice could originate from either or a combination of the following possible misalignments

i Tabulate the intensity of light transmitted by the polarization filter as a function of angular position of the polarizer

ii Verification of Malus Law

iii Tabulate the in

tab2

tab3

tab4

Components Included

• Optical breadboard
• Kinematic laser mount
• Diode laser with power supply
• Laser fiber coupler
• Bending loss apparatus
• Fiber holder with angular tilt
• Fiber chuck holder
• Optical fiber samples
• Pinhole photodetector
• Detector O/P measurement unit
• XYZ translation stage
• PMMA rod with mount

connect with us ..

Home l Products l Supports l News & Events l About Us l Contact Us