Optical Fibers & Accessories

Products >> Optical Fibers & Accessories

Holmarc maintains adequate stock of widely used optical fibers and accessories for research as well as for educational applications.

Optical Fibers & Accessories

Buffered UV/VIS & VIS/NIR Fibers

These optical fibers are ideal for regions of the UV/Visible and Visible/NIR spectrum not covered by our plastic optical fibers. These fibers have a fused silica core and cladding, as well as a polymer buffer for added protection.

Fiber Optic Patch Cords

High quality fiber optic patch cables are ideal for applications requiring optimum transmission in the UV-VIS (180nm-1150nm) or VIS-NIR (340nm-2500nm) range.

Plastic Optical Fiber

These fibers are intended to provide higher transmission in the visible region of the spectrum. They can be used for a wide range of applications, from general industrial light guides to short distance data transmission.

Optical Fiber Cutting Block

This device uses tight tolerance guide holes to position fibers for cutting with standard blades (included). Jacketed and unjacketed fibers may be cleaved with this instrument: from 750 to 3300 micron unjacketed...

Optical Fiber Hot Knife

Packed with a jacket stripper for 1mm jacketed fibers, the hot knife is simply a heated blade that yields clean terminations. This type of termination is especially useful in cutting fibers...

Fiber Positioners

Fiber Chuck & Holder

Fiber chuck can be used to hold fibers up to 1 mm thick. Fiber chuck holder can be used for mounting fiber chucks to standard posts. The chuck holder hasM6 tapped hole at the base for post mounting.

XY Fiber Positioner

XYFP make use of sliding contact bearings and is suitable for positioning multi-mode fibers. The positioner is equipped with a fiber chuck and chuck holder to clamp fibers up to 1 mm diameter.

XY Fiber Positioner Motorized

XYFPM stages make use of sliding contact bearings and are suitable for positioning multi-mode fibers. The positioner is equipped with a fiber chuck and chuck holder to clamp fibers up to 1 mm diameter.

Kinematic & Motorized Kinematic fiber positioner

Kinematic mounts are used for precise tilt adjustment in two different planes. Fiber clamping provision is done through center tilting unit. This positioner is equipped with a fiber chuck and chuck holder to clamp fibers

Fiber Inspection Microscope

Fiber Inspection Microscope is specially designed for field termination inspection. The device utilizes a white LED for illumination. It produces excellent detail of scratches and contamination.

XYZ fiber positioner

XYZ fiber positioners consist of precision, compact XYZ stage with fiber clamping provision through the center of the Z-axis stage. These stages make use of preloaded rolling contact ball bearing guide ways

XYZ fiber positioner Motorized

XYZ fiber positioners consist of precision, compact XYZ stage with fiber clamping provision through the center of the Z-axis stage. These stages make use of preloaded rolling contact ball bearing guide ways

Custom Fiber Positioners

Five Axis Fiber Positioner

Holmarc's "5AFP series" fiber positioners have five degrees of freedom. The positioner employs three precision linear stages for X, Y and Z-axes positioning and a kinematic mount for precision tilt adjustment in two planes.

Five Axis Fiber Positioner Motorized

Holmarc's “5A-MFP series" fiber positioners have five degrees of freedom. The positioner employs three precision linear stages for X, Y and Z-axes positioning and a kinematic mount for precision tilt adjustment in two planes.

Angular Fiber Positioner

Angular fiber positioner consists of fiber clamp attached to a graduated rotation stage. The stage is preloaded to eliminate play and wobble. A cross wire is fitted to the center of stage

Laser Fiber coupler

Laser fiber coupler consists of microscope objective and XYZ fiber mount to achieve maximum coupling of laser beam to fiber tip. The device can be either post mounted or base mounted.

Fiber optic condenser unit

Fiber optic condenser unit consists of lens unit and XYZ fiber mount. It can be used for various illumination or imaging applications. The device can be either post mounted or base mounted.

Condenser is a combination of lenses with a short focal length used for concentrating a light source onto a small area. The lenses are mounted in a black anodized aluminium casing.

Fiber Collimator/ Focusers

Our collimators are designed for fiber laser applications which require pure gaussian beam. Holmarc fiber optic collimators are available from 5mm to 40mm aperture sizes.

connect with us ..

Home l Products l Supports l News & Events l About Us l Contact Us

Privacy Policy l Terms & Conditions

© 2012 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.