Post Mounting System

Products >> Post Mounting System

Post mounting system is a convenient device for holding various optical mounts in a breadboard based experimental setup. Height and angular position of mounted optics can be easily adjusted. The post system includes post, post holder, post holder base and post collar.

12 mm Post System

Stainless steel post with a tolerance of -0.01mm / -0.03mm from its diameter.

► Stainless steel, SS 304
► Precision ground finish
► M6 & M4 tapped holes

Posts are held in position by thumb screws.

► Aluminium alloy
► Black anodized finish
► M6 tapped hole at the base

Pedestal Adapter

These adapters are compatible with post holders and pedestal forks.

► Stainless Steel
► Ground finish

Pedestal Post Holder

Pedestal post holder can be fixed anywhere on the breadboard with the help of a pedestal fork.

► Aluminium alloy
► Black anodized finish
► Posts are held in position by spring loaded thumbscrews

Pedestal fork is used for clamping pedestal post at desired position on an optical breadboard.

► 9mm thickness
► M6 C’bored slot
► Hard chrome finish

Post collar allows convenient rotary adjustment of the post inside a post holder.

► Aluminium alloy
► Black anodized matte finish

Translating Post Holder

It provides non - rotating height adjustment by a knurled rotatable ring.

► Height adjustment range: 15 mm
► Holds 12 mm diameter standard posts
► Aluminium alloy

16 mm Post System

M6 tapped holes at both ends.

► 16mm diameter
► Stainless steel, SS 304
► Precision ground finish

Posts are held in position by spring loaded thumb screws.

► Aluminium alloy
► Black anodized finish
► M6 tapped hole at the base

Pedestal Adapter

These adapters are compatible with post holders and pedestal forks.

► Stainless Steel
► Ground finish

Pedestal Post Holder

Pedestal post holder can be fixed anywhere on the breadboard with the help of a pedestal fork.

► Aluminium alloy & SS at the base
► Black anodized matte finish
► M6 tapped hole at the base

Pedestal fork is used for clamping a pedestal post at desired position on an optical breadboard.

► Magnetic steel
► 9mm thickness
► M6 C’bored slot

Post collar allows convenient rotary adjustment of a post inside a post holder.

► Aluminium alloy
► Black anodized matte finish

Translating Post Holder

Translating post holder provides non - rotating height adjustment by a knurled rotatable ring.

► Height adjustment range: 15 mm
► Holds 16 mm diameter standard posts
► Aluminium alloy

Post Bases

Standard Post Base 12mm

Post base is used to mount a post holder anywhere on the breadboard.

► Black matte finish
► 9mm thickness
► M6 clearance slot

Standard Post Base 16mm

Post base is used to mount a post holder anywhere on the breadboard.

► Black matte finish
► 9mm thickness
► M6 clearance slot

Round Slotted Post Base

Round slotted post base help to fix a post or a post holder at a convenient horizontal angle...

► Black anodized matte finish
► M6 clearance slots
► M6 C’bored holes

Swivel Post Base

This is a 360 degree rotatable post base. It is suitable for spatially restricted optical setup.

► 12mm thickness
► 360 degree rotatable
► M6 clearance slot

This base provide coarse XY adjustment and is compatible with PH series post holders

► 16.5mm thickness
► M6 clearance slot
► M6 & M4 C’bored hole

Kinematic Post Base

Kinematic post base can be tilt adjusted with the help of grub screws provided.

► +/- 2 degree adjustment
► M6 clearance slot
► M6 C’bored hole

Single Axis Base

This platform is provided with tilt adjustment in one plane with the help of 80 tpi lead screw.

► Black anodized finish
► +/- 2 degree adjustment
► M6 C’bored holes

Double Axis Tilt Platform

This platform provides tilt adjustment in two planes with the help of 80 tpi lead screw.

► Black anodized finish
► +/- 2 degree adjustment
► M6 C’bored holes

This base can be used to mount instruments that are post mounted.

► Ground finish
► 25mm thick
► M6 tapped holes at 25mm grid

Switchable Magnetic Base

These bases come with a switchable magnet for the easy positioning of optical components

► Machined finish
► M6 tapped holes at 25mm grid
► 65 x 50mm mounting area

Post Clamps

Right Angle Post Clamps

This is a 360 degree rotatable post base compatible with our standard PH and PH-16-D series PH

► Black anodized finish
► H7 holes
► M6 locking knobs

Top End Post Clamps

Top end post clamp can be used for clamping 12 mm or 16 mm diameter posts at right angle

► Black anodized finish
► M6 tapped hole at bottom
► M6 locking knob

Swivel Type Post Clamps

Swivel post clamps can be used to achieve three degrees of freedom for post mounted components.

► Aluminium alloy
► Black anodized finish
► H7 hole

Flexible Arm Post Clamp

This clamp provides 360 degree rotation about its axis and swings 90 degree to the side.

► Stainless steel
► Machined finish
► M6 tapped hole at bottom

Pedestal System

These solid stainless steel pedestal posts of 25 mm diameter are available in various lengths.

► Stainless steel
► Ground finish
► M6 Mounting holes at the end

Pedestal clamps are designed for using with pedestal posts.

► Stainless steel
► Black anodized finish
► M6 locking knobs

These shims are often used for increasing the height of a pedestal post as per requirement.

► Stainless Steel
► H7 holes
► M6 locking knobs

These solid stainless steel pillar posts of 25 mm diameter are available in various heights.

► Stainless steel
► M6 locking knobs

Pedestal Adapter

Pedestal Adapters are compatible with post holders and pedestal forks.

► Stainless steel
► M6 tapped hole at the base.
► Posts are held in position by spring loaded thumbscrews.

Pedestal fork is used for clamping a pedestal post at desired position on an optical breadboard.

► 9mm thickness
► M6 C’bored slot
► Hard chrome finish

Heavy Duty Post System

Damped Heavy Duty Post

Damped heavy duty posts are made out of precision machined SS pipes.

► Stainless steel
► Ground finish at ends
► M6 tapped holes

Heavy Duty Post Base

Heavy duty post base is used to mount a heavy duty post to an Optical table.

► 15 mm height
► M6 clearance slots
► M6 C’bored hole

These clamps are used for mounting components on a heavy duty post.

► Aluminium alloy
► Black anodized finish
► M6 & M4 mounting holes

Right Angle Bracket

This bracket with M6 clearance slots can be fixed on a heavy duty post with the help of an adapter plate.

► Aluminium alloy
► Black anodized finish
► M6 mounting holes

Compact Post Clamp

This post clamp helps to attach an optical mount to a heavy-duty post.

► Aluminium alloy
► Black anodized finish
► M6 mounting holes

Dual Rod System

It is useful to mount heavy components and position them within 300 mm in vertical plane

► Aluminium alloy
► Black anodized finish
► M6 mounting holes

Table Clamp & Stoppers

Table clamps are used to clamp component bases to the optical table

► Aluminium alloy
► Black anodized finish
► M6 mounting holes

Stoppers are used for repeated positioning and clamping of components on an optical table.

► Aluminium alloy
► Black anodized finish
► M6 mounting holes

connect with us ..

Home l Products l Supports l News & Events l About Us l Contact Us

Privacy Policy l Terms & Conditions

© 2010 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.