Products    /    Lab Equipments   /    Spin Coating Unit with Glove Box Compatible
Spin Coating Unit

with Glove Box Compatible

Model: HO-TH-05G
Easy to install inside Glove box
Chuck diameters - 10mm, 22mm, 35mm

Holmarc’s Spin Coater with glove box compatible, Model no: HO-TH-05G is a dedicated system suitable for use inside glove box to spin coat small substrates in research laboratories with well controlled spin process parameters. This model offers separate controller which has user friendly front panel having keyboard and LCD for programming the spin process. The user can, hence operate the spin coater in the remote location. A two way Start and Stop switches enables spin coater to be turned on or off within glove box or using controller. Spin duration, spin speed, acceleration, etc. are all programmable parameters through the front panel of the controller. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control. A vacuum chuck powered by oil-less vacuum pump holds the substrate at the spinning head. Three sets of nylon anti-corrosive vacuum chucks are provided along with the equipment for holding substrate from 15 x 15 mm square to 100 x 100 mm square.

The nylon made spin chamber is compact within a footprint of 296 x 266 mm and easy to install into the glove box. A transparent cover on top of the chamber protects the surroundings by keeping the spin off solution inside. All components in the device are corrosion protected to make it clean glove box compatible.


Features

    Chuck diameters : 10mm, 22 mm, 35 mm

    Stand holder to hold pipette to dispense solution.

    Mechanical clips or locks to hold samples without vacuum *.

    Digital Pipette for dispensing of liquid into the substrate *.

    Stand which is used for holding manual pipette *.

*  optional


    Actuator     :     Brushless DC motor
    Spinning speed     :     60 - 9999 rpm
    Power input     :     230V, 50Hz
    Read out     :     20 x 4 line LCD
    Spin chamber     :     Nylon
    Acceleration     :     5 - 2000 rpm / sec
    Spinning Speed Accuracy     :     < 5%
    Programmable parameters     :     Speed , Acceleration, Dwell time and No. of steps
    Maximum no of steps     :     9
    Program memory     :     9 programs (non – volatile)
    Dimension     :     400mm Depth x 275mm W x 500mm H
    Weight (appx.)     :     34 Kg


Spin Coating Unit

Holmarc’s Spin Coater, Model no: HO-TH-05 is a dedicated tabletop system to spin coat small substrates in research laboratories with well controlled spin process parameters.



Spin Coating Unit with UV curing system

In this model of spin coater, UV LED curing system is used whenever there is a need for curing and drying of coatings...




This device can be customized as per requirement to meet specific applications

Home | Products | Supports | Company | Contact Us

Privacy Policy | Terms & Conditions


©2016 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.

Follow us