Products    /    Microscope & Imaging Instruments   /    2D Transfer system with Trinocular Microscope 2
2D Transfer System

with Trinocular Microscope

Model No: HO-2DTS-TM-02BD

1.   Trinocular Microscope with motorized Z focusing stage (1 set)

    Optical system     Infinity corrected
    Observation Method     Bright field and Dark field
    Illumination     Reflected (Co-axial or epi-scopic and two flexible arm LEDs)
    Illumination system     High bright white LEDs, Intensity adjustable
    Nosepiece     Motorized, Revolving, Quadruple, Software controls
    Viewing head     Siedentopf Trinocular head, 30 degree, 48 - 75 mm IP adjustment
    Eyepiece     10X Wide field eyepiece, FN = 20 mm, dioptre adjustable
    Focusing     Motorized with Push button as well as software controls
    Microscope objective     1. Plan Apo Bright field / Dark field 10X
    Numerical Aperture     0.3
    Working distance     14 mm
    FOV eyepiece     2 mm
    FOV camera     0.57 mm x 0.428 mm
      2. Plan Apo Bright field / Dark field 20X
    Numerical Aperture     0.5
    Working distance     4 mm
    FOV eyepiece     1 mm
    FOV camera     0.285 mm x 0.214 mm
    Plan Apo Bright field / Dark field 50X
    NA :     0.55
    Working distance :     8 mm
    FOV eyepiece :     0.4 mm
    FOV camera :     0.114 mm x 0.0856 mm


Camera Specifications

    Optical format     1/2.5” CMOS
    Active imager size     5.70 mm x 4.28 mm
    Active pixels     2592 x 1944 (5Mp)
    Pixel size     2.2 x 2.2 um
    Shutter type     Electronic rolling shutter (ERS)
    Frame rate     Full resolution - 7 fps, 640 * 480 (BIN) - 26.7 fps
    Spectral response     380 - 650 nm
    Exposure time     0.072 ms - 3000 ms
    Image format     RAW, BMP, JPG, PNG
    Operating temperature     -30ºC to +70ºC
    Sensitivity     1.76V / lux - sec (550 nm)
    Power consumption     381 mW at 15 fps full resolution
    Interface     USB 2.0
    Lens mount     C - mount
2.   XYZ theta sample stage with Heater & Vacuum chuck
    Motorized XYZ stage
    XYZ Travel     25 mm each
    XYZ Drive     Precision lead screw with stepper motor
    Leadscrew pitch     0.4 mm
    XYZ Resolution     7.8 nm (micro step mode)
    XY axis accuracy     1 microns with linear encoder
    Z axis accuracy     50 nm with linear encoder
    Guide way     Precision V grooved guide way
    Construction     Aluminium alloy
    Finish     Black anodized
    Software controls for XYZ sample stage
    Joy stick controls for XY and Push buttons for Z axis
    Motorized rotation stage
    Top plate diameter - 75 mm
    M6 tapped holes at 12.5mm grid
    360 degree rotatable
    Precision worm gears
    Double bearing design
    Resolution - 0.01 degree
    Accuracy - 0.01 degree with encoder
    Stepper motor Drive
    Black anodized aluminium
    Vacuum chuck and Heater with temperature controller
    Sample plate diameter     40 mm
    Temperature range     RT - 200º C
    Temperature increment     1ºC
    PID Controller
    Vacuum provision to hold the samples
    Vacuum Pump
    Software controls for temperature and vacuum
3.   Motorized XYZ Stamping stage with manual tilting platform
    Motorized XYZ stage
    XYZ Travel     25 mm each
    XYZ drive     Precision lead screw with stepper motor
    Leadscrew pitch     0.4 mm
    XYZ Resolution     7.8 nm (micro step mode)
    XY axis accuracy     1 microns with linear encoder
    Z axis accuracy     1 micron with linear encoder
    Guide way     Precision V grooved guide way
    Construction     Aluminium alloy
    Finish     Black anodized
    Software controls for XYZ stage
    Joy stick controls for XY and Push buttons for Z axis

4.   Base plate with levelling foot

5.   Glass / Sample Holder

6.   Image grabbing & motorized control software



Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.