Products    /    Motorized Linear and Rotation Stages    /    Motorized Linear Stage    /    RCMTS-125 Series
Motorized Translation Stages

RCMTS-125 Series
Aluminum alloy B51S
Precision Lead ball screw

RCMTS-125 series stages are designed to carry heavy loads, yet to move and position precisely. Recirculating type ball bearing linear ways are used as guides. Drive is provided by a combination of ball screw and stepper motor.

Z-axis: In these stages in vertical configuration, if the load is more than 15 kgs, the carriage may come down under gravity when power to the motor is switched off. This is when ball screw is directly attached to the steppermotor. If the load to be lifted is more than 15 kgs, it is advisable to use our Z axis stages with a gear box (1:6 ratio) in between motor and ball screw. Though this reduces speed in Z axis, load capacity increases considerably.

# controller sold separately    [ read more + ]



    Straight Line Accuracy :     +/- 20 Micron over 300 mm travel
    Drive :     Precision Lead ball screw
    Construction :     Aluminium Alloy B51S
    Finish :     Black anodized
    Tapped Holes on Carriage :     M6 Tapped Holes
    Mounting Holes on the base :     M6 Tap and M6 CBR
    Design :     Modular Type
    Configuration :     Multi axis
    Travel :     100 to 500 mm
    Carriage Size :     125 mm x 125 mm
    Load Capacity :     Up to 90kg vertical





Drive Details 4 mm Pitch Ball Screw 4 mm Pitch Ball Screw
with Magnetic brake *
Positioning Accuracy 0.02 mm 0.01 mm
Repeatability 0.01 mm 0.01 mm
Resolution 0.00125 (Micro Step Mode) 0.00125 (Micro Step Mode)
Speed 16 mm / sec (4RPS) 16 mm / sec (4RPS)
* Feature : Magnetic break helps stages carriage from sudden falling while loading heavy load in Z axis
4 mm Pitch ball Screw
Model No:
Travel Length Load Capacity
X - Axis
Load Capacity
Z - Axis *
Drawing Price ( $ )
RCMTS125-100-2 100 mm 310 mm 50 kg 15 kg - 772.00
RCMTS125-150-2 150 mm 360 mm 50 kg 15 kg - 938.00
RCMTS125-200-2 200 mm 410 mm 50 kg 15 kg - 1212.00
RCMTS125-300-2 300 mm 510 mm 45 kg 15 kg - 1555.00
RCMTS125-500-2 500 mm 750 mm 45 kg 15 kg -
    * (maximum holding kg weight at off condition)


4 mm Pitch ball Screw
with Magnetic brake
Model No:
Travel Length Load Capacity
X - Axis
Load Capacity
Z - Axis
Drawing Price ( $ )
RCMTS125-100-B 100 mm 310 mm 90 kg 70 kg -
RCMTS125-150-B 150 mm 360 mm 90 kg 70 kg -
RCMTS125-200-B 200 mm 410 mm 86 kg 62 kg -
RCMTS125-300-B 300 mm 510 mm 85 kg 60 kg -
RCMTS125-500-B 500 mm 750 mm 80 kg 55 kg -
Accessories

Base Plate Price ( $ ) Vertical Bracket Price ( $ ) Horizontal Bracket Price ( $ )
BP-RCMTS125-100 127.00 VAB-RCMTS125-100 135.00 HAB-RCMTS-125
Size : 125 x 125 mm
135.00
BP-RCMTS125-150 153.00 VAB-RCMTS125-150 185.00
BP-RCMTS125-200 182.00 VAB-RCMTS125-200 245.00
BP-RCMTS125-300 195.00 VAB-RCMTS125-300 262.00
BP-RCMTS125-500 270.00 VAB-RCMTS125-500 366.00


Adapter Plate



Base Plate



Angle Bracket



Home | Products | Supports | Company | Contact Us

|

©2025 Holmarc Opto-Mechatronics Ltd. All rights reserved.