Products    /    Motorized Linear and Rotation Stages    /    Motorized Linear Stage    /    RCMTS-150 Series
Motorized Translation Stages

RCMTS-150 Series
Aluminum alloy B51S
Precision Lead ball screw

RCMTS-150 series stages are available for travel upto 150 mm. Carriage size is 150 x 150 mm. Drive is by ball screw-stepper motor combination. There are bellows for dust protection. Re-circulating type linear ways are used as guides.

Z-axis: In these stages, in vertical configuration, if the load is more than 15 kgs, the carriage may come down under gravity when power to the motor is switched off. This is when ball screw is directly attached to the stepper motor. If the load to be lifted is more than 15 kgs, it is advisable to use our Z axis stages with a gear box (1:6 ratio) in between motor and ball screw. Though this reduces speed in Z axis, load capacity increases considerably. Please see the tables and chart below for details.

# controller sold separately    [ read more + ]



    Straight Line Accuracy :     +/- 30 Micron over 300 mm travel
    Drive :     Precision Lead ball screw
    Construction :     Aluminium Alloy B51S
    Finish :     Black anodized
    Tapped Holes on Carriage :     M6 Tapped Holes
    Mounting Holes on the base :     M6 Tap and M6 CBR
    Design :     Modular Type
    Configuration :     Multi axis
    Travel :     100 to 750 mm
    Carriage Size :     150 mm x 150 mm
    Load Capacity :     Up to 90kg vertical







Drive Details 4 mm Pitch Ball Screw 4 mm Pitch Ball Screw
with Magnetic brake *
Positioning Accuracy 0.02 mm 0.01 mm
Repeatability 0.01 mm 0.01 mm
Resolution 0.00125 (Micro Step Mode) 0.00125 (Micro Step Mode)
Speed 16 mm / sec (4RPS) 16 mm / sec (4RPS)
* Feature : Magnetic break helps stages carriage from sudden falling while loading heavy load in Z axis
4 mm Pitch ball Screw
Model No:
Travel Length Load Capacity
X - Axis
Load Capacity
Z - Axis *
Drawing Price ( $ )
RCMTS150-100-2 100 mm 330 mm 50 kg 15 kg - 1050.00
RCMTS150-150-2 150 mm 380 mm 50 kg 15 kg - 1160.00
RCMTS150-200-2 200 mm 430 mm 50 kg 15 kg - 1562.00
RCMTS150-300-2 300 mm 480 mm 45 kg 15 kg - 1736.00
RCMTS150-500-2 500 mm 790 mm 45 kg 15 kg - 2114.00
RCMTS150-750-2 750 mm 1070 mm 45 kg 15 kg - 2500.00
    * (maximum holding kg weight at off condition)


4 mm Pitch ball Screw
with Magnetic brake
Model No:
Travel Length Load Capacity
X - Axis
Load Capacity
Z - Axis
Drawing Price ( $ )
RCMTS150-100-B 100 mm 330 mm 90 kg 70 kg - 1184.00
RCMTS150-150-B 150 mm 380 mm 90 kg 70 kg - 1293.00
RCMTS150-200-B 200 mm 430 mm 86 kg 62 kg - 1695.00
RCMTS150-300-B 300 mm 480 mm 85 kg 60 kg - 1870.00
RCMTS150-500-B 500 mm 790 mm 80 kg 55 kg - 2247.00
RCMTS150-750-B 750 mm 1070 mm 80 kg 50 kg - Get Quote
Accessories

Base Plate Price ( $ ) Vertical Bracket Price ( $ ) Horizontal Bracket  
BP-RCMTS150-100 164.00 VAB-RCMTS150-100 189.00 HAB-RCMTS-150
Size : 150 x 150 mm
174.00
BP-RCMTS150-150 189.00 VAB-RCMTS150-150 218.00
BP-RCMTS150-200 230.00 VAB-RCMTS150-200 265.00
BP-RCMTS150-300 262.00 VAB-RCMTS150-300 300.00
BP-RCMTS150-500 328.00 VAB-RCMTS150-500 375.00
BP-RCMTS150-750 - VAB-RCMTS150-500 750.00


Adapter Plate



Base Plate



Angle Bracket



Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us