Products    /    Analytical Instruments    /    Solar Simulator 2
    Print

Solar Simulator

HR222 Series
Stable light source
Cost effective solar simulator


Designed for Solar cell / photochemistry / photobiology testing and environmental exposure testing.

The main objective of solar simulation technology is to produce illumination approximating natural sunlight in order to provide a controllable indoor test facility under laboratory conditions. Our Xenon arc lamp based solar simulators provide the closest solar spectral spectra available from artificial sources. These solar simulators, also called sun simulators, provide excellent price performance. The solar simulators can be used both in laboratory or production environments. Solar simulators are used in a wide range of research areas including photobiology, photo-oxidation, photodegradation, photovoltaics, and photocatalysis. It can be used for the testing of any processes or materials that are photosensitive, including solar cells, sun screen, cosmetics, plastics, aerospace materials, skin cancer, bioluminescence materials, photosynthesis, water treatment, crude-oil degradation, and free radical formation. In short, it can be used in any application where the effects of exposure to sunlight are to be studied.

Depending on your application requirements, we can provide a variety of Solar Simulators to fit your needs. In addition, each of Holmarc’s solar simulators are customizable to best suit your requirements. The design of the solar simulator is a trade-off between power and uniformity. Higher uniformity can be achieved with lower power; or power can be increased and uniformity reduced. If your application is in Ultra Violet (UV), Infrared or specific band of wavelengths discuss your requirement with our engineers.

Our solar simulators are available with three different air mass (AM) filters: AM0, AM1 and AM1.5. Class A Spectral Match Optical Intensity Stability < 1%. Features include built in timer, monitoring the bulb operating time, automatic/programmable Shutter Control, Optical power monitoring/feedback photo detector, 360 degree rotatable head, external solar power meter Etc. Optional bandwidth filters are available for spectral measurements. Contact us for more details

More

Solar Simulator Test station

Model: HR-SS300WRM1-100ATS Price : $ 25,834.00

Designed for Solar cell testing.

It includes 1SUN Class A Solar Simulation System with an illuminated area of 100mm x 100mm and Air Mass Filter of AM1.5, PC controlled source measurement unit and a constant temperature controlled sample platform. Other features include built in timer, monitoring the bulb operating time, automatic/programmable Shutter Control, Optical power monitoring/feedback photo detector, external solar power meter Etc


    Current Measurement Range     +/-1 A
    Resolution     0.1 uA
    Voltage Range     +/- 5V
    Resolution     5 mV
    Type     Four Quadrant Operation
    Constant temperature control unit     Yes
    Temperature control Range     5 - 75 Degree C
    Operation     PC controlled
    Software     SSTS Analyzer

This instrument is also available with Keithley SMU interface & Labview compatibility. Optional bandwidth filters are available for spectral measurements. Contact us for more details...



SS222 Series Solar Simulator
Model: HR-SS150WRM1-50A
    1 SUN Class A Solar Simulation System with an illuminated area of 50mm Diameter and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 2 %
Price : $ 12,084.00
Model: HR-SS150WRM2-50B
    2 SUN Class B Solar Simulation System with an illuminated area of 50mm Diameter and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 5 %
Price : $ 11,417.00
Model: HR-SS150WRM2-50C
    2 SUN Class C Solar Simulation System with an illuminated area of 50mm x 50mm and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 10 %
Price : $ 10,417.00
Model: HR-SS300WRM1-50A+
    1 SUN Class A+ Solar Simulation System with an illuminated area of 50mm diameter and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 1 %
Price : $ 15,834.00
Model: HR-SS300WRM1-50U
    5 SUN Class U Solar Simulation System with an illuminated area of 50mm diameter and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : > 10 %
Price : $ 17,417.00
Model: HR-SS300WRM1-100A
    1 SUN Class A Solar Simulation System with an illuminated area of 100mm x 100mm and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 2 %
Price : $ 19,167.00
Model: HR-SS300WRM2-100B
    2 SUN Class B Solar Simulation System with an illuminated area of 100mm Diameter and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 5 %
Price : $ 18,250.00
Model: HR-SS300WRM2-100C
    2 SUN Class C Solar Simulation System with an illuminated area of 100mm x 100mm and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : 10 %
Price : $ 16,750.00
Model: HR-SS300WRM3-100U
    3 SUN Class U Solar Simulation System with an illuminated area of 100mm diameter and Air Mass Filter of AM1.5
    Spatial Non-uniformity of irradiance : > 10%
Price : $ 17,417.00


Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.