Products    /    Analytical Instruments    /    Solar Simulator with IV Measurement System
    Print

Solar Simulator with
IV Measurement System

Model: HO-SC-IV


Model: HO-SC-IV is integrated with 300W Xenon lamp with housing, optics, power supply and an easy to use software with capability to measure dark and lighted IV characteristics of solar cell. System includes a sample stage, capable of accommodating samples up to 50 mm diameter and probes to contact the sample. Light is normally incident on the sample. Illumination area can be adjusted using lens assembly system.




    Light source :     300W Xenon lamp
    Filter :     Air mass filter (AM1.5G)
    Solar Simulator Class :     A C A
    Spectral Match :     0.75 - 1.25
    Spatial non-uniformity of irradiance :     10 %
    Temporal instability of irradiance :     2 %
    Maximum beam diameter :     50 mm
    Maximum intensity :     1 Sun
    Minimum intensity :     0.7 Sun
    Bias voltage :     +1V to -1V
    Bias voltage resolution :     5 mV
    Current measurement range :     0.1 uA to 0.75 A
    Sample size :     Up to 50 mm
    Sample holder with XY motion      
    Dimensions :     600 x 922 x 525 mm ( W x H x D)

    Quartz Type :     Ozone Free
    Wattage :     300 W
    Luminous Flux :     7000 lm
    Luminous Intensity :     700 cd
    Average Luminance :     27000 cd / cm2
    Regulation Mode :     Constant current with power limit
    Protection :     Open / Short circuit proof, overtemp, over current

Software Features

    Performs IV scanning in user specified range

    Exports the results to spreadsheet file

    Operating system requirement: Windows XP / 7 / 8 / 8.1 / 10

    PC Interface: RS232 or USB (Using a USB to serial converter)


Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.